[Download] XG5000 Download V4.52/V4.60 LS PLC Software Free

[Download] XG5000 Download V4.52 & V4.60 LS PLC Software Free (Google Drive)

The LS XGB Is a Micro PLC and This PLC Contains Maximum Performance and Minimum Cost. LS XGB PLC is Divided into 4 types 01. E types PLC. 02. SU Types PLC. 03. M Types PLC. 04. U Types PLC. XG5000 LS PLC Software is a License-free Software of LS PLC. However, you can Easily [Download] XG5000 Download V4.52/V4.60 LS PLC Software Free and Install. LS PLC has many communication functions and used many applications. LS XG5000 V4.52.1 and XG5000_V4.60 are the latest Programming software of LS XGB/XGK PLC. Through the LS PLC Software, XG5000 converts KGLWIN File to LS XGB Project.

So Today plchmiservo.com would like to share the LS PLC Software and How to XG5000 Download.

Supported Model of LS PLC Software XG5000

LS PLC Software Supports

XGK Series: CPUA/CPUE/CPUH/CPUHN/CPUS/CPUSN/CPUU/CPUUN

CPUA/CPUA/CPUA/CPUA/CPUA/CPUA/CPUA.

XGI Series, XGR Series, XGS Series, XMC Series

XGB Series: XBC/XBM/XGB

Supported Windows of LS PLC Software XG5000

LS PLC Software XG5000 is a Windows-based Software So this software Supports the OS.

Windows XP
Windows Vista
Windows 7
Windows 8
Windows 10

Programming Language of XG5000 LS PLC Software

LS PLC Software XG5000 Download and Install the Software then Create Project then check the Programming Language

Ladder Diagram
Instruction List
SFC
ST

Addressing LS PLC Software Programming:

XBM CPU

Input: P00………P09,0A,0B,0C,0D,0E,0F, P10,P11……………P19,P1A, 1A,1B,1C,1D,1E,1F

(Hexadecimal)

Output: P020……………P029, P0A, P0B, P0C, P0D, P0E, P0F, P030……………P039…P3A…3F

(Hexadecimal)

Maximum I/O Points: P0000…………P127F XGB

Auxiliary Relay: M0000……………..M255F

Keep Relay: K00000……………….K2559F (Hexadecimal)

Link Relay: L00000…………………L1279F (Hexadecimal)

Special Relay:F0000……………….F255F (Hexadecimal)

Timer: T000……………………………..T255 (Decimal)

Counter: C000…………………………..C255 (Decimal)

Data Resistor: D0000…………………D5119 (Decimal)

Setup Process LS PLC Software XG5000 V4.52.1:

[Download] XG5000 Download V4.52/V4.60 LS PLC Software Free the LS PLC Software from our website www.plchmiservo.com

Double-click the software XG5000 V4.52.1 and Click ok.
Then Click Install Visual C++2005

+Click yes then wait a few Times

+click next

+Then User name: [email protected], Organization: plchmiservo.com then Click Next

+Click “next”

+Click on Install and “wait” for 5-10 Minutes.

+Click install and Again Click Install.

+Click Finish (when The Installation Process is Complete)

+Click Help and Click about XG5000.

How to Create Project:

Click on LS PLC Software XG5000
Then Click Project
Then Click New Project then Project name and select CPU Series and Type and Click OK

How to Programming and Simulation:

Strat Simulation:

Go to Tools and Click Start Simulation

Click the set the link to enable with parameters then click ok.

End Simulation:

Go to Tools and Click End Simulation

How to Communication/Cable Connection Check:

Right, Click on Computer/This PC/My PC then manages and click device manager and click +port also check the port number.

How to Upload/Download Program By using LS PLC Software XG5000

Upload:

[Download] XG5000 Download V4.52/V4.60 LS PLC Software Free then Install the Software. However, Open the LS PLC Software XG5000 and Go to Online then manual Setting then selects the cable Type RS-232C/USB/Ethernet also Click Setting and Select Port Number (If we used RS-232C Cable) and Click OK.

Open the LS PLC Software Then Click Online then Click Connect

Again Click Online then Click Read [Read from PLC]…..

Show the message Run Input-output Synchronization Click Yes

Click No. CPU Change Mode

Click Data Memory Select all and click ok.

Save the Project

Download:

Go to Online then manual Setting then selects the cable Type RS-232C/USB/Ethernet also Click Setting and Select Port Number (If we used RS-232C Cable) and Click OK.
Click Online then Click Connect
If the Cable is connected then go online Click Write [Write to PLC]…..
Click the set the link to enable with parameters then click ok.

PLC RUN/STOP Change Mode:

Open the LS PLC Software XG5000, Then Software Go Online and Change Mode
Click RUN/STOP/DEBUG

Reset/Clear LS PLC Memory:

Open The Software XG5000 Then Go to Online
Click Reset/Clear
Reset PLC/Clear PLC/SD Memory/Clear All PLC.

Online Monitoring:

Goto Monitor Start Monitoring

PLC Information PLC RUN/STOP Mode:

Goto Online Click diagnostics and Click PLC Information.

Online Program Editing:

Go to Online Start Online Editing.
When Online Editing is finished then click again online then and End Online Editing.

Programming Cable of LS PLC

We need to cable for the program Upload/Download LG PLC Programming Cable for Master-K120S/the 80S/XGB Series PLC to PC Communication cable (USB).

Cable Driver of LS PLC Software:

Before LS PLC downloads and Uploading the program must check your Cable and Comport, you must install this driver CH341SER.ZIP.

AMSAMOTION USB Driver

We have given software [Download] XG5000 Download V4.52/V4.60 LS PLC Software Free Google Drive link to download your required Software.

+ [Download] XG5000_V4.60 “LS PLC” Software

Link: https://drive.google.com/file/d/1FjLgtS_1_BplqUXFkEiICRiXa83v7e2q/view?usp=sharing

[Download] XG5000 Download_V4.52.1 “LS PLC Software”

>>>LS PLC Software Link:

https://drive.google.com/file/d/1ZexuKvca9rkHg51jWP96p8HlbPWi3NOd/view?usp=sharing

Thanks for Visiting our Website and Reading our Content XG5000 LS PLC Software, if you need any LS Programmable Logic Controller/Human Machine Interface/ Variable Frequency Drive/Servo Drive or any help for LS All Types of PLC/HMI/VFD, and Servo Software, Installation Software/Programming and Program Upload /Download. Then Please Visit our site and contact us via mail at [email protected] or Contact us via Phone/WhatsApp Number at +8801713722455.

If you find the above articles useful, Please share the post……….

Other Software For Helping

+XP BUILDER LS HMI Software Update V3.5

+XP Builder V2.20 LS All HMI Software