Smartshare™ pc sw installing and setting, Smartshare™ pc sw installing and, Setting | LG PA77U User Manual | Page 69 / 126

69

SMARTSHARE

SmartShare™ PC SW Installing and Setting

Install the SmartShare™ PC SW (DLNA) program on your PC.

1

Download the setup file from the path below in order to use the DLNA function.

http://liu.lge.com/smartshare/release/smartshare.zip

2

Install the downloaded SmartShare™ PC software.

3

You can run the program when installation is complete.

NOTE

y

DLNA or Media Link service is only available if projector and other devices are

connected via a single router.

PC requirement for installing LG SmartShare™

Item

Minimum Specifications

Recommended

Specifications

CPU

Intel Pentium4 2.0 G or higher/
AMD Sempron 2000 or higher

Intel Pentium Dual Core or
higher/AMD Athlon 64 x 2 or
higher

RAM

1 GB or higher

2 GB or higher

VGA

64 MB RAM, 1024 x 768 or
higher resolution, and a video
card that supports 16 bit or
more colors

128 MB RAM, 1024 x 768 or
higher resolution, and a video
card that supports 16 bit or
more colors

Hard Disk Drive

200 MB or higher

Operating

System

Windows XP (Service Pack 2 or later), Windows Vista, Windows 7,
Windows 8

l Windows Media Player: 11.0.5721.5280 or higher is
recommended

Network

Environment

100 MB Ethernet, Wireless LAN (WLAN) IEEE 802.11g or higher

y

Program speed can be delayed depending on the system performance and the
network environment.